Commercial and industrial energy storage

iFreezer

A 218 kWh cabinet that trims peak demand and keeps critical loads running when the grid fails.

Stored energy
218kWh
AC power
100kW
Depth of discharge
95%
iFreezer, Commercial and industrial energy storage

Overview

Lower peaks, steadier supply.

It charges when power is cheap and discharges at peak times to cut demand charges, and switches to off-grid operation without a break if the grid fails. Add cabinets in parallel as the load grows.

All in one cabinet

  • PCS and BMS already inside
  • IP55 enclosure
  • Simple to install and service

Safe and reliable

  • BMS and EMS control
  • Overheat, short-circuit and overvoltage protection
  • Gas suppression with smoke and heat detection

Many uses

  • Peak shaving and valley filling
  • Backup for critical loads
  • Cabinets connect in parallel for more capacity

Where it is used

  • Factories and plants
  • Commercial buildings
  • Backup for critical loads

Specification

Main parameters

Standard configuration. Some options change these figures.

iFreezer main parameters
Storage
Rated energy218 kWh
AC power100 kW
Depth of discharge95%
Cycle lifeOver 5,000 cycles at 0.5C
On-grid
Grid connection400 V AC, 3W + N + PE
Frequency50 / 60 Hz (±2%)
Power factor0.9
HarmonicsBelow 3% at rated power
Off-grid
Rated output voltage400 V
Maximum AC current150 A
Voltage accuracy1%
Frequency accuracy±0.2 Hz
Switchover time20 ms
Unbalanced load100%
Overload105–110% for up to 10 minutes; stops above 110%
Other
ProtectionIP55
CoolingLiquid-cooled battery, air-cooled power cabinet
Noise70 dB or less
CommunicationRJ45 / RS485 / Modbus TCP
Fire protectionGas, smoke and heat detection, Novec 1230 or FK-5-1-12 suppression, exhaust fan
Corrosion protectionC4
EMS, ATS, STS, MPPTOptional
Dimensions (L × W × H)2000 × 1250 × 2000 mm

Start with the challenge

Tell us what the site
needs to do.

Share the location, the load and what is getting in the way. Our team will help you work out which system, and how many, the job needs.

Speak to an EMS specialist Email a quote request